1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Saganaw Conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by gibson-d@sbcglobal.net, Oct 29, 2011.

  1. gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    I'm doing a Saganaw conversion on my '71 CJ5, Dauntless. I have Mc Ruff's Kit and Herm's floor mount and bottom bearing for the stock '71 column. Also Borgeson u-joints and intermediate shaft. Does anyone have pictures of the column mounting both inside and outside? Also I have 2 left side exhaust manifolds from 231's. I would like pictures of exhaust pipe routing on the left side back to factory y pipe. Thanks, David
     
    gibson-d@sbcglobal.net, Oct 29, 2011
    #1
  2. nickmil

    nickmil In mothballs.

    [​IMG]

    Pic of the floor mount I made.

    [​IMG]

    Pic of the steering box mount

    [​IMG]

    Pic where the column comes through the firewall. I used a DJ column so didn't have to use a bearing but it gives you the basic idea.
     
    nickmil, Oct 29, 2011
    #2
  3. gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Thanks Nickmil. What exhaust manifold is that? Mine will exit in the same place, how'd you route the pipe?
     
    gibson-d@sbcglobal.net, Oct 29, 2011
    #3