1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 clutch arm?

Discussion in 'Early CJ5 and CJ6 Tech' started by napaguy, Feb 24, 2011.

  1. napaguy

    napaguy Banned

    I am installing my buick 225 bell to my sm420 and using a stock dauntless clutch fork...the problem I
    Having is the fork doesn't seem to be engaged far enough on the throwout bearing

    I looked at jims recent swap and his fork sticks onto the bearing alot further

    Here is a pic:
    [​IMG]

    Ideas?

    Overall length on the fork seems to be about 8 and 5/8ths
     
    napaguy, Feb 24, 2011
    #1
  2. nickmil

    nickmil In mothballs.

    Is this an aftermarket replacement like Omix/Ada or Crown? If so that's your problem. I've experience issues with their arms for this application not being right.
     
    nickmil, Feb 25, 2011
    #2
  3. jpflat2a

    jpflat2a what's that noise?

    I'm with Nick
    arm doesn't look right for whatever reason
     
    jpflat2a, Feb 25, 2011
    #3
  4. napaguy

    napaguy Banned

    Yes aftermarket arm but not sure of manufacturer...I've got some chev arms laying around I'm going to look at . Thanks for the replies
     
    napaguy, Feb 25, 2011
    #4