1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

question on Ecj5.com forum wiring diagram

Discussion in 'Early CJ5 and CJ6 Tech' started by Brem10mm, Nov 8, 2010.

  1. Nov 8, 2010
    Brem10mm

    Brem10mm Member

    Near Ames, IA
    Joined:
    Feb 15, 2010
    Messages:
    96
    On the wiring diagram that is available on the this form at

    http://www.earlycj5.com/wordpress/wp-content/uploads/2009/07/CJ_With_V6.pdf

    Please identify for me what part six wires are feeding into and out of, that is shown located just to the left of the Ballast Resistor. Is this a Terminal Block or something else. They do show a Terminal Block up by the LF head light but this part question has no identification.
     
  2. Nov 8, 2010
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    I think that's a firewall grommet.
     
  3. Nov 8, 2010
    mortten

    mortten I can’t put my finger on it 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Peninsula, Ohio
    Joined:
    Apr 17, 2006
    Messages:
    1,740
    Yep. That's where the wires go through the firewall.
     
  4. Nov 8, 2010
    Brem10mm

    Brem10mm Member

    Near Ames, IA
    Joined:
    Feb 15, 2010
    Messages:
    96
    Thanks
     
  5. Nov 8, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Just for clarification the block on the fender by the left front headlight is a connector block for the headlights/turn signals/ park lamps.
     
  6. Nov 9, 2010
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,924
    Don't know how year specific it is but my Tux 66 had a bakalite socket and plug that would disconnect all 6 wires from the engine to the main harness. That plug would corrode up cause ignition problems so I got rid of it.
     
New Posts