1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T14 assembly question

Discussion in 'Early CJ5 and CJ6 Tech' started by txultra, Jul 28, 2010.

  1. Jul 28, 2010
    txultra

    txultra New Member

    Joined:
    Jan 26, 2010
    Messages:
    6
    When installing the main shaft gear, there is a spacer, washer and nut. does the spacer go in front or behind the gear? I found some exploded views but none show the order with everything installed.

    Thanks
     
    txultra, Jul 28, 2010
    #1
  2. Jul 28, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    It goes rear output bearing, spacer, transfer case input gear, washer, nut. I like to use a little threadlocker on the nut to make sure it doesn't come loose.
     
    nickmil, Jul 28, 2010
    #2
New Posts