Re: PTO setup for jeep

I am very interested in finding information on the PTO for the Willys. Koening model k51/201. I am not sure I know that I am possting to the correct thread but would greatly appreciate someone responding to this so I can know. My email is sasadams@ghvalley.net. Thank you, Scott Adams

 

Separated from other post for better exposure. Asking questions not related ot the original post is called "thread hijacking" and best to start your own post. Both to not muddy the waters of the original post and you are more likely to get better exposure and info with your own thread.

 

Scott,

What do you want to know?

It mounts to the rear of the d18 transfercase and enables you to have a front drive to run a winch.

Depending upon which gear you use you have 3 forward drive or "in" speeds and one reverse "out" speed.

I have a catalog, installation instruction, correct "new mounting hardware', bearings and seals available as well. I resently liquidated my entire PTO hoard after finding not one but two Koenig Model 58's the Holy Grail of the Koenigs for the CJs.

 

Here is some info I have on them

http://www.hdts.vcn.com/JEEP/KOENIG%20KING%20WINCH%20MANUAL.pdf