Not a CJ build

Looks great. But, man, you need to get some Sun on those legs.

 

yeah yeah yeah... I dont get to wear shorts at the new job so they stay covered up all day long now. Ive started welding in my speedo so hopefully that will speed up the sun tanning process

Well got a little more done

Got the mohawk welded up and tacked to the housing, turned the center section 180 to center up the driveshaft a little better in the back. Also cut the upper coilover mount and started tacking it together. Still need to cut the spacers for the pass side but its slowly getting there.






Also cut out some rockwell pattern wheel centers for a buddy

 

you know i had the tap and die in the car today. why didn't you remind me.

 

it will be alright..I dont feel like pulling that center section out again for a while. At least till it comes back out to weld it up and paint everything, then we can drill and tap the rest of the holes.

 

Got a cell..now need to come up with a hold down of some sort

 

Got the rear 4 link bars tacked together and in. Also started playing with the bump stop can mounts. Need to cut the plates out of 3/16 and weld it up. Then I'll work on the coilover axle mounts and some bumpstop landing pads.

 

Slowly making some progress...Made some bumpstop pads and d ring mounts

 

Fat bottom girl...

 

They make the rockin' world go round.

 

uwop.

You got da skillz, man.

 

No! Bad Clint! NO!

Lookin sharp Jason. I need to drag my junk over there and you can help me finish it

 

Look ma no stands



I forsee lots of mud coming inside the jeep

 

A couple of updates..

Got a radiator




Some tubing for Frank and I



Been working on a disk brake kit for the rockwells



Got my steering ram 3x9 PSC ram




Hopefully having the next week off work I can make some good progress on this thing.

 

That's a brute Jason!!!! Your skills have really come a long way.

Good Lord it's wide - did you flip the ends of the Rockwells and it's still that far past the body?

 

Did the Bud Light come with the ram?

 

That pic is with them flipped in. To run the disk brakes I'll need some bigger wheels and the hubs will be flipped out. So when I'll need some with major offset to help narrow it back up a little.

I wish...that would've made it an even better christmas present!

 

Wow! (tear in the eyes), It's beautiful man........

 

Got some mo done today..

Got the upper link brackets made



Made the frame end of the upper links tabs..Still need to make the piece to tie the inner one to the frame



Got the radiator fit in. Tomorrow I'll build the brackets for it.

 

Its off the jack stands finally!!!!!!!!! Front 4 link pretty much done...still got to mount the air bumps and do some more welding. Ended up at 114" WB, top of cage is 74" now and the belly is at 18"