1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can you remove the white-ish glass haze?

Discussion in 'Early CJ5 and CJ6 Tech' started by sac13, Jan 18, 2010.

  1. Jan 18, 2010
    sac13

    sac13 Come oooonnnnn summer....

    Shelby Township, MI
    Joined:
    Jun 12, 2006
    Messages:
    321
    My 74 CJ has a white-ish ring around the outside 3" of glass. Is there any way to remove this? The glass is in great shape other than this and I'd hate to replace it. Hopefully it can be removed or repolished or something....

    Thanks!
     
  2. Jan 18, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Most of the time that is moisture that has worked its way in between the layers of glass and no way of removing it. Windshields are laminated safety glass with two layers of glass with a layer of something in between (it escapes me at the moment what is in between). Without a pic though it's impossible to tell.
     
  3. Jan 18, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Yep. Almost always the material between the laminated that turns foggy looking...
    FWIW, those windshields are cheap and plentiful. I got one from Oconee for $98 shipped a couple weeks ago..
     
  4. Jan 19, 2010
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Both of my old cars have this problem here in MA. The law here says the fog cannot intrude into the viewing area, but fog at the edge is ok.

    I'd just replace it. A local glass shop should be able to do it cheaply.
     
  5. Jan 19, 2010
    sbu22

    sbu22 Member

    New Orleans
    Joined:
    Nov 15, 2008
    Messages:
    72
    $146 got my new 60 CJ windshield pro installed, with tinted glass and new gasketing, about 2 months ago. They custom cut it on site.
     
  6. Jan 19, 2010
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Just a comment on tinted glass - realize that it reduces your night vision by more than you'd expect. If you like it, fine, but it was introduced to keep the cabin temperature down and make it easier to air condition the cabin. Not much call for that on a Jeep, IMO.
     
  7. Jan 19, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    mine is tinted as well. you really cant tell it though. it was the only piece the glass shop had that wasnt a new sheet. so he cut me a deal as he needed the larger piece for another scheduled job. he said that the piece i got was for heavy equipment, like a bulldozer. nothing like being stuck in a 20ton greenhouse all day with the sun beating down thru the glass. in my case it just was the cheaper soulition and got the glass man out of a bind:)
     
  8. Jan 19, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Virtually every windshield made is tinted to a small degree. Sometimes hard to tell until you see it out of the vehicle..

    FWIW, these windshields are extremely easy to install yourself, especially if you use a new gasket. Just get a couple plastic windshield spoons, and use plenty of dish soap, Go Jo, or the like for lubricant.
     
  9. Jan 19, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I my case I go with tinted ws glass because when it's dusty and climbing a hill with the sun in your eyes I've found it cuts the glare better.
     
  10. Jan 19, 2010
    sac13

    sac13 Come oooonnnnn summer....

    Shelby Township, MI
    Joined:
    Jun 12, 2006
    Messages:
    321
    Looks like I'm shopping for a new windshield. Thanks for the info! My ws frame is pretty nasty, so I'll start the search for a complete unit...
     
New Posts