1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

V6 Motor mounts

Discussion in 'Early CJ5 and CJ6 Tech' started by newguy69, Oct 1, 2009.

  1. Oct 1, 2009
    newguy69

    newguy69 New Member

    Sacramento Calif
    Joined:
    Jan 10, 2007
    Messages:
    15
    I am putting a Buick 231 in a 1965 Tux Park does anybody make a stock type weld in motor mount?
     
    newguy69, Oct 1, 2009
    #1
  2. Oct 1, 2009
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    not stock type
    see if you get some donors off a bad V6 frame
     
    jpflat2a, Oct 1, 2009
    #2
  3. Oct 2, 2009
    jccity6

    jccity6 knucklehead

    sacramento, ca
    Joined:
    Jul 5, 2009
    Messages:
    78
    I am replacing the motor mounts in my 62 cj5 build and am going to go with Novack for my mounts. I have read good things about their mounts and they havent let me down with any of the rebuild kits I have used.
    good luck
     
    jccity6, Oct 2, 2009
    #3
  4. Oct 2, 2009
    BlueComet

    BlueComet 1962 JEEP CJ-5

    Montrose, Colorado
    Joined:
    Mar 17, 2006
    Messages:
    204
    X2 on the Novak mounts. I've done some shopping around, and they seem like a good product for the money. I'm planning to use them on my '62 when the time comes.
     
    BlueComet, Oct 2, 2009
    #4
  5. Oct 2, 2009
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,539
    I used the Novak mounts for my Dauntless on an M38A1 frame. They work fine. Lots of adjustment available for height of the engine.
     
    Posimoto, Oct 2, 2009
    #5
  6. Oct 2, 2009
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,472
    Another for the Novak Mounts - the latest design is real easy to use. You can even screw up a bit and they will still fit well :)
     
    Warloch, Oct 2, 2009
    #6
  7. Oct 2, 2009
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I think I know where some stock frame mounts are and I think they have the rubber mounts on them as well. Contact me at nickmiln@aol.com and I will give you their contact info. Nickmil
     
    nickmil, Oct 2, 2009
    #7
New Posts