1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

removing drive yolk

Discussion in 'Flat Fender Tech' started by sammy, Aug 29, 2009.

Page 2 of 2
  1. Sep 13, 2009
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    R) A big red button that would shoot the bad yoke into inner space.... R) Its good it runs but not in 4wd.... That will be changed, now I need to get familiar with replacing R&P's
     
    sammy, Sep 13, 2009
    #21
  2. Sep 18, 2009
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,516
    If you have access to a yoke wrench, install it before putting on the puller. After tightening the puller as per above discussion, give the yoke wrench a couple of good wumps with a 2 1/2 lb hammer in both directions. It will help loosen the splines.
     
    duffer, Sep 18, 2009
    #22
Page 2 of 2
New Posts