1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

saw an add for a t-18 for sale

Discussion in 'Early CJ5 and CJ6 Tech' started by SuperTodd, Feb 14, 2009.

  1. Feb 14, 2009
    SuperTodd

    SuperTodd Member

    Talent, Oregon
    Joined:
    Aug 17, 2007
    Messages:
    167
    it has a 10" input shaft that is 10 spline, it has a dana 20 hooked to it. What would this have been bolted to?
     
    SuperTodd, Feb 14, 2009
    #1
  2. Feb 14, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Not enough info. A pic would help. Could be Jeep or IHC, though 10" stickout does not fit with any Jeep app that I know of.
     
    timgr, Feb 14, 2009
    #2
  3. Feb 15, 2009
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    :iagree:


    If the transmission has no ears on it to bolt to a bellhousing but instead has holes drilled directly into the front face of the case then it most likely is from an IH Scout 2. They commonly used T-18's and T-19's and also commonly used the 4.02-1 close ratio trans so if you look at it make sure it has the ratio you want.
     
    nickmil, Feb 15, 2009
    #3
  4. Feb 15, 2009
    SuperTodd

    SuperTodd Member

    Talent, Oregon
    Joined:
    Aug 17, 2007
    Messages:
    167
    I'm not really in the market I just saw it in an add, I figured it came from a scout or possibly a commando, if that was an option. I sent the seller an email and asked what it was out of.
     
    SuperTodd, Feb 15, 2009
    #4
New Posts