1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 V6 - looking for a slinger

Discussion in 'Early CJ5 and CJ6 Tech' started by burnzee, Sep 29, 2008.

  1. Sep 29, 2008
    burnzee

    burnzee 46 CJ2A 225 oddfire

    Riverside, MO
    Joined:
    Feb 17, 2008
    Messages:
    38
    I'm looking for a source for a new / used oil slinger for the crankshaft. Mine didn't have one when I disassembled the engine. I've done a few searches with no luck. Engine is an early 225, engine #1358435. Thanks for the help.
     
    burnzee, Sep 29, 2008
    #1
  2. Sep 29, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    You can always post a wanted to buy ad in the classified section...
     
    sparky, Sep 29, 2008
    #2
  3. Oct 1, 2008
    jeepdaddy2000

    jeepdaddy2000 Active Member

    Eagle Point oregon
    Joined:
    Jun 24, 2004
    Messages:
    1,179
    Might take it down to the local machine shop and eye it up to other GM offerings. I'll bet it will cross over to something else and machinists usually have a couple of pieces like that lying around for dirt cheap.
     
    jeepdaddy2000, Oct 1, 2008
    #3
  4. Oct 1, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I've got one from a 231 you can have for cost of shipping. E-mail me at nickmil@clackamas.edu and send me your addy. I believe the 225 and 231 use the same slinger but wouldn't swear to it. Nickmil
     
    nickmil, Oct 1, 2008
    #4
  5. Oct 1, 2008
    burnzee

    burnzee 46 CJ2A 225 oddfire

    Riverside, MO
    Joined:
    Feb 17, 2008
    Messages:
    38
    Thanks guys.

    nickmil, I'll send you a email.
     
    burnzee, Oct 1, 2008
    #5
New Posts