1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Acme Hardtop Install

Discussion in 'Intermediate CJ-5/6/7/8' started by 1975CJ5, Aug 24, 2008.

  1. Aug 24, 2008
    1975CJ5

    1975CJ5 Member

    Joplin, MO
    Joined:
    Feb 16, 2005
    Messages:
    125
    My Acme fiberglass top was delivered today....

    I've found a write up about re-finishing (this one needs it) but nothing on installation. Any advice (pictures are helpful) regarding how to mount to body/windshield?

    It looks like originally, it was screwed to the inside of the windshield frame. This would be difficult because of having a full cage, I can't get a screwdriver between the front rollbar and the windshield frame.

    Again, anything that would be helpful would be appreciated.

    Thanks
     
    1975CJ5, Aug 24, 2008
    #1
  2. Aug 31, 2008
    Military Jeeper

    Military Jeeper New Member

    Joined:
    Mar 6, 2008
    Messages:
    16
    btt for you...........................I'm interested as well.
     
    Military Jeeper, Aug 31, 2008
    #2
  3. Aug 31, 2008
    rixcj

    rixcj Member

    Rhode Island
    Joined:
    Nov 12, 2006
    Messages:
    351
    Can you post a pic of your front hoop and your windshield frame? Maybe we can come up with some ideas.
     
    rixcj, Aug 31, 2008
    #3
  4. Sep 2, 2008
    cobra5laddict

    cobra5laddict Member

    thornton colorado
    Joined:
    Sep 29, 2005
    Messages:
    70
    there is a thin 12 ga metal bracket that rivits to the w.s. frame. the draw latch (attached to the top) latches and secures the top to the w.s frame. see below. as far as fiitting with your cage, we would need to see some pics. the draw latch does take up some space to function.

    this is similar to the latch i used on my acme top.

    http://www.southco.com/product/class.aspx?cid=7509
     
    cobra5laddict, Sep 2, 2008
    #4
  5. Sep 2, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Do you have any pics of the setup with the metal bracket riveted to the WS frame?
     
    sparky, Sep 2, 2008
    #5
  6. Sep 2, 2008
    1975CJ5

    1975CJ5 Member

    Joplin, MO
    Joined:
    Feb 16, 2005
    Messages:
    125
    Any pictures that anybody has would be greatly appreciated....I'll try to get some showing my roll cage in the next couple of days. The top is just sitting on the Jeep right now and I'm not sure it aligns correctly with the windshield at all. Also, is there supposed to be some type of "door jamb" that attaches to the windshield frame as well (like those on a Bestop Super top)?

    Thanks,
     
    1975CJ5, Sep 2, 2008
    #6
  7. Sep 3, 2008
    cobra5laddict

    cobra5laddict Member

    thornton colorado
    Joined:
    Sep 29, 2005
    Messages:
    70
    you are correct, i have seen a lot of acme tops and am pretty familiar with them. i have only seen one jeep that still had the jamb pieces still intact and installed. on mine, (mine are missing) i will probably form mine from a block of wood then fiberglass or use a shrinker/ stretcher on some aluminum angle to re-create the parts. i have also seen some people adapt the jamb parts that were used with the original whitco tops.

    i will take some pics when i have a some time
     
    cobra5laddict, Sep 3, 2008
    #7
  8. Oct 12, 2009
    theycallmefudd

    theycallmefudd New Member

    Joined:
    Apr 9, 2009
    Messages:
    16
    Im having a problem with the same thing.... I could really use a picture of what you have done, i know I could do some glass work and make it fit but would really like to see some pics before I start ripping into it....:?
     
    theycallmefudd, Oct 12, 2009
    #8
New Posts