1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1976 Fuse block diagram

Discussion in 'Intermediate CJ-5/6/7/8' started by kodyowenby10, Aug 20, 2008.

  1. Aug 20, 2008
    kodyowenby10

    kodyowenby10 Member

    Joined:
    Jul 25, 2007
    Messages:
    129
    I need a diagram of a 1976 fuse block so i know what fuses to put where all the letters have wore off of mine.
     
  2. Aug 20, 2008
    tommycj

    tommycj Member

    Joined:
    Mar 24, 2007
    Messages:
    143
    The information you need would be in the owner's manual.
    I checked mine, a '77, and the manual and the block do not match, as to which fuse controls what.
    Just a few differences, but enough to create a headache.
    I don't have a '76 manual, so maybe someone else can help.
     
  3. Aug 20, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    the parts manual states that the fuse blocks are all the same for 1976-1978..all Jeep models.
    if that were the case, the lettering would have to be the same as well...which means the fuse positions would all be the same.
    The 1976 service manual might be the better source for this info.
     
  4. Aug 20, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    Factory Service Manual is your friend. I'd highly recommend getting one as every older Jeep owner should have one. Very good reference material for most all repairs or basic info on your Jeep.
     
  5. Aug 21, 2008
    kodyowenby10

    kodyowenby10 Member

    Joined:
    Jul 25, 2007
    Messages:
    129
    I guess ill just have to look for a link or something else online because the wiring harness and dana 30 in the front is the only thing in my jeep that is from a 1976 the rest of it is 1974.
     
  6. Oct 4, 2008
    kodyowenby10

    kodyowenby10 Member

    Joined:
    Jul 25, 2007
    Messages:
    129
    I got a haynes manual hoping that would help but no luck. Could anyone tell me what size fuse to put where or a diagram of some sorts
     
  7. Oct 4, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
New Posts