1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

tilt steering column

Discussion in 'Early CJ5 and CJ6 Tech' started by 53 m38a1 w/225, Dec 10, 2002.

  1. Dec 10, 2002
    53 m38a1 w/225

    53 m38a1 w/225 New Member

    Bell California
    Joined:
    Oct 17, 2002
    Messages:
    5
    I know there has been some discussion on this before.
    I want to put a tilt wheel on mine too many :beer: :beer: :beer: :beer: :beer: :beer: :beer: 's
    What year jeep or other vehicle should I use one from?
    I saw a few GM cars at the local wreking yard with tilt colums.
    Please help.
    I wanna start driving my jeep by jan.
     
  2. Dec 10, 2002
    53Flattie

    53Flattie Intigator

    Easley, SC
    Joined:
    Sep 23, 2002
    Messages:
    855
    I think most of the GM style columns will work. I'm using one from a late 70's Wagoneer. Actually I'm using the tilt column, shaft, and Saginaw box. The column actually fit into the flattie with no modification other what cutting off the arm at the bottom which hooks up to the shift linkage b/c it came from an automatic. Otherwise, it fit back through the original hole in the floor, and the mount on the column lined up perfect with the dash.
    If you need more explaination, let me know, or I can get pic's sometime.
     
  3. Dec 10, 2002
    1966cj5

    1966cj5 New Member

    Las Vegas Nevada...
    Joined:
    Sep 25, 2002
    Messages:
    13
    When I started out the stock steering wheel hit me right in the belly :shock: :beer: Wasconvinced it had to go tilt
    I lowered my seats 1''-1 1/2", cut the rear fender out and moved the seat back, Went to a 15" wheel and even shortened the stock column because the new steering wheel had a dish of 2"- 3"
    It's comfy now :mrgreen:
    Tilt would not adjust right. Because of the pivot point :?
    B4 you go to all the trouble, think real hard. :rofl:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    I can also give measurements if you want them. ;)
    Just remember it must be comfy :beer:

    ps. (Plenty of room to grow now) :beer: :rofl: :beer: :rofl:
     
  4. Dec 11, 2002
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Chev S-10's, Camaro/Firebirds, Wagoneers, Later CJ tilt columns all work good. The one I like to use the most is XJ Cherokee (little Cherokee) with manual trans. You can get them with all the controls for things like wiper's, etc right in the column and the size works very well, plus if you get them with the wheel and horn button they say Jeep in the column. :rofl: Nickmil.
     
  5. Dec 11, 2002
    barry

    barry Inquisitive Member

    Earp, CA
    Joined:
    Sep 23, 2002
    Messages:
    195
    Jeff,

    Couldn't see the pics.
    :( :( :(
     
  6. Dec 11, 2002
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    I've also had the notion of pushing the column higher up into the dash. Not sure where it'll come out with the bus wheel though.
     
  7. Nov 9, 2006
    Ottomatic

    Ottomatic OTTO

    Joined:
    Nov 9, 2006
    Messages:
    2
    need a tilt column

    I also need to put a new steering column in my jeep. I just bought it last week, and the problem is the room between the seat and the steering wheel. It has racing seats that curve up on the ends and I can hardly get in and out. I was wondering if anyone knows what year of jeep steering columns will fit in a 1976 CJ5. I used to have a 1982 CJ5 and I liked that column. Any help would be appriciated.

    Thanks, Otto
     
  8. Nov 9, 2006
    Andy4802

    Andy4802 Canadian Jeep junkie

    Hudson, Qc, Canada
    Joined:
    Jul 30, 2006
    Messages:
    410
    Re: tilt steering colunm

    i want to put a tilt in too... i used to have an old suburban and i loved the tilt column in that truck...
    since we're on the topic, do you guys think a tilt from a 'burb would work?
     
  9. Nov 10, 2006
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    Re: tilt steering colunm

    I used a column from Ididit when I converted to P/S back in '98. www.ididit.com
     
  10. Nov 10, 2006
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    Re: tilt steering colunm

    Almost any tilt column will work - the focus needs to be on length (30" or less works best - I use 28") and what you want... I used to focus on GM columns in sports cars.

    I use Ididit and Flamming River mostly now (depending on what I get a good deal on). Just not worth my time fighting with the junk yards and work those need afterwards.
     
  11. Nov 14, 2006
    Ottomatic

    Ottomatic OTTO

    Joined:
    Nov 9, 2006
    Messages:
    2
    Re: tilt steering colunm

    Thanx for the feedback. I guess I will head to the junkyard and start looking for a tilt column.

    Thanx,
    Otto
     
  12. Nov 14, 2006
    Hansh

    Hansh Going Mobile

    SE Wisconsin
    Joined:
    Dec 7, 2004
    Messages:
    425
    I used one out of a 1970 or 71 Chevy Monte Carlo.
     
  13. Nov 15, 2006
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
  14. Nov 15, 2006
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    Mine came from a '78 CJ5.
     
New Posts