1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Agr Power Steering Pump

Discussion in 'Intermediate CJ-5/6/7/8' started by boxer, May 20, 2008.

  1. May 20, 2008
    boxer

    boxer New Member

    Western Washington
    Joined:
    Sep 17, 2004
    Messages:
    47
    I bought a AGR 805256 pump. It said to use the pulley from my stock pump. The problem is that my old pump has a keyway & a nut. The new AGR pump is for a press on pulley. Anyone have any idea what pulley I will need? My CJ5 has a AMC 304. Thanks
     
    Last edited: May 20, 2008
  2. May 20, 2008
    trickpatrick

    trickpatrick Done? LOL

    North Idaho USA
    Joined:
    Nov 29, 2006
    Messages:
    838
    I saw a press on one in a wheeler mag recently aluminum and it had built in fan blades pretty trick.

    Just goggle it.
     
  3. May 20, 2008
    NorCoJeeper

    NorCoJeeper Member

    Ft. Collins CO
    Joined:
    Feb 10, 2006
    Messages:
    470
    If it's a Saginaw pump, I believe the centers are all the same, just find one with the same outside diameter as your old one.
     
  4. May 20, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Make sure the pulley off set is the same also....
     
  5. May 21, 2008
    ca51flatty

    ca51flatty I wheeled w Charlie Hazel

    SoCal
    Joined:
    Jan 19, 2004
    Messages:
    156
    I think the one you are thinking of is from Genright and they make some quality parts!
     
  6. May 23, 2008
    boxer

    boxer New Member

    Western Washington
    Joined:
    Sep 17, 2004
    Messages:
    47
    Thanks for the info. I just e-mailed them to see if there pulley will fit this pump.
     
New Posts