1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

dana 27 camber adjustment?

Discussion in 'Early CJ5 and CJ6 Tech' started by oddfire, Feb 3, 2008.

  1. Feb 3, 2008
    oddfire

    oddfire New Member

    huntington beach, CA
    Joined:
    Oct 7, 2007
    Messages:
    41
    i just put some new leaf springs and 33" tires on my jeep and they are cambered quite a bit. how do i correct this? 67 cj5 dana 27.
     
    oddfire, Feb 3, 2008
    #1
  2. Feb 4, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Check the trunnion bearings (knuckle bearings) and see if there is any play. If there is then your knuckles need rebuilt or at the least the bearings need the pre-load re-set.
    Did you re-set toe (alignment) after the lift? If not the lift will pull in the tires at the front giving the appearance that camber is off. (if you still have the stock ross steering with two tie rods). Nickmil
     
    nickmil, Feb 4, 2008
    #2
  3. Feb 4, 2008
    oddfire

    oddfire New Member

    huntington beach, CA
    Joined:
    Oct 7, 2007
    Messages:
    41
    i'll take a look, thanks.
     
    oddfire, Feb 4, 2008
    #3
New Posts