1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

pto winch

Discussion in 'Flat Fender Tech' started by jeep2003, Jan 6, 2008.

  1. Jan 6, 2008
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,939
    I have a freind who has a jeep with this pto unit he removed from his jeep. It was chain driven off the pto he doesnt know what its for or if its worth anything. I dont have the numbers or writing on it off hand but i can find out if needed. Anybody know anything about it ? Thanks
    [​IMG]

    [​IMG]
    [​IMG]
     
    jeep2003, Jan 6, 2008
    #1
  2. Jan 6, 2008
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,140
    Thats a PTO gear reduction unit, mainly used for driving farm stuff such as hay threshers, saws, generators. Cleaned up & painted they go for $250 + on ebay. The actual PTP attached to the xfer case can go for anywheres from $50 to $600 depending on the model. Search on ebay for "jeep pto" to get a better idea of what's going for what.

    H.
     
    Howard Eisenhauer, Jan 6, 2008
    #2
  3. Jan 7, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    What Howard said. The first pic shows the reduction box. Those normally were mounted on the rear draw bar with a drive shaft running from a pto mounted to the transfer case to the reduction box. The second pic appears to be a transmission mounted pto. I'd find out from your friend what tranny it came from as some have very good value and some less. Nickmil
     
    nickmil, Jan 7, 2008
    #3
  4. Jan 8, 2008
    Schlotka

    Schlotka default member

    Weed, CA
    Joined:
    May 1, 2005
    Messages:
    82
    Maybe I'm confused, but the first picture is a rear pto unit (the side closest to the vehicle) and you're missind the input shaft, the second picture shows the output shaft. The gear on it ran a winch, usually for a wrecker if memory serves (like a koenig or ramsey), that's why there is only a roller on tap of fairlead. You don't have the winch pictured.
     
    Schlotka, Jan 8, 2008
    #4
  5. Jan 8, 2008
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,939
    Yes it is one unit that was chain driven off the pto and the input shaft is missing. I got the answer i was looking for if it has value and not just some cobled together contraption. Thanks guys
     
    jeep2003, Jan 8, 2008
    #5
New Posts