1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cart in front of the horse...

Discussion in 'Early CJ5 and CJ6 Tech' started by Dondo, Nov 20, 2007.

  1. Nov 20, 2007
    Dondo

    Dondo These are my good pants..

    Hutchinson, Kansas
    Joined:
    Jun 26, 2004
    Messages:
    314
    but if I can answer this now, I won't have to wait later...:) Can you install a T90 by itself and then attach the D18 later? Or is it easier to mate them up and install them at one time?
     
    Dondo, Nov 20, 2007
    #1
  2. Nov 20, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Yes you can install the T-90 now. Just make sure the output shaft doesn't slide back and drop the needle bearings into the transmission case. I use wire to hold the output shaft in place after I build the tranny's so I don't have to worry about it so much. Nickmil
     
    nickmil, Nov 20, 2007
    #2
New Posts