1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Oil Shield issue

Discussion in 'Early CJ5 and CJ6 Tech' started by Dondo, Oct 29, 2007.

  1. Oct 29, 2007
    Dondo

    Dondo These are my good pants..

    Hutchinson, Kansas
    Joined:
    Jun 26, 2004
    Messages:
    314
    I'm in the middle of rebuilding my T90 transmission. The oil shield/pickup thing in the transmission is getting hung up on the little ring gear thing on the input shaft. I've punched the shaft out of the cluster gear assembly (maybe this is not the proper name, it is the group of gears that lives in the bottom of the transmission) and let it fall to the bottom of the case (as per instructions). I've been messing around trying to work the input shaft out of the front but again, the oil shield is in the way. What am I missing here?
     
    Last edited: Nov 4, 2007
    Dondo, Oct 29, 2007
    #1
  2. Oct 29, 2007
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,382
    You just need to move it out of the way. It can be done, you'll just have to experiment till you get it out of the way.
     
    Glenn, Oct 29, 2007
    #2
  3. Oct 29, 2007
    Dondo

    Dondo These are my good pants..

    Hutchinson, Kansas
    Joined:
    Jun 26, 2004
    Messages:
    314
    lol...okay. I guess I'm out of experimental idea's....been fussing with it for a couple of hours. I can't believe that a 1/8th inch of steel is causing me this much headache... :)
     
    Dondo, Oct 29, 2007
    #3
  4. Oct 30, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Remove the bearing from the input shaft using a puller. Then you will have th room to remove everything. Nickmil
     
    nickmil, Oct 30, 2007
    #4
New Posts