1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1970 cj5 pedal setup??

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Apr 29, 2007.

  1. Apr 29, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,586
    I was looking at the 1970 frame i got to swap under my jeep. and i noticed that there was no tube on the bottom of the frame for the pedals to mount to. How do the pedals work for the the later run of the early cj5??
     
    DanStew, Apr 29, 2007
    #1
  2. Apr 29, 2007
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    mine pivot on a tube bolted to the bottom of the frame.
     
    $ sink, Apr 29, 2007
    #2
  3. Apr 29, 2007
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    The tube mounts to the pivot ball on the side of the trans; maybe without a drivetrain, there is nothing to hold the tube up, so it was removed. I've got the complete '70 setup if you're short some pieces.
     
    jayhawkclint, Apr 29, 2007
    #3
  4. Apr 29, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,586
    oh no, i am not going to use the old setup, i have hanging peals, i was just curious to how it was setup. My current frame has the mount under the frame that the pedals pass thru, the new one is missing this mount, so either it was taken off already. but it is one less thing for me to torch off the frame
     
    DanStew, Apr 29, 2007
    #4
New Posts