1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 44 install kit?

Discussion in 'Flat Fender Tech' started by trickpatrick, Feb 28, 2007.

  1. Feb 28, 2007
    trickpatrick

    trickpatrick Done? LOL

    North Idaho USA
    Joined:
    Nov 29, 2006
    Messages:
    838
    Wasnt sure where to post this.

    Hope this is ok.

    I have been trying to find a install kit for a reasonable cost for my 44 10 spline diff.

    Nobody seems to know if the 19 spline kit will work any suggestions?
     
    trickpatrick, Feb 28, 2007
    #1
  2. Feb 28, 2007
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,526
    bearings should be all the same
    only difference between 10 and 19 is the 10 and 19
    everything else (except axles) should be the same
     
    jpflat2a, Feb 28, 2007
    #2
  3. Feb 28, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    What Jim said. Just make sure you get one for a 19/10 spline diff. The 30/27 spline diffs had different carrier bearings. Nickmil
     
    nickmil, Feb 28, 2007
    #3
  4. Mar 1, 2007
    Mike C

    Mike C Member

    Austin, TX
    Joined:
    Feb 19, 2007
    Messages:
    743
    I got mine from Randy's Ring & Pinion. I'm going to have to call them again today because the local parts store can't get part #'s on axle seals, axle bearing, or the bearing race.
     
    Mike C, Mar 1, 2007
    #4
New Posts