1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T98 Behind a Dauntless V6

Discussion in 'Early CJ5 and CJ6 Tech' started by Harold W., Oct 7, 2006.

  1. Oct 7, 2006
    Harold W.

    Harold W. Member

    Middle Georgia
    Joined:
    May 9, 2003
    Messages:
    61
    I have a T98 and was wondering what it would take to bolt it up behind a V6. Anyone with some experience with this. Was this ever a factory option?
     
    Harold W., Oct 7, 2006
    #1
  2. Oct 7, 2006
    mtruckstuff

    mtruckstuff Held captive in Detroit..

    Joined:
    Jul 8, 2005
    Messages:
    7
    Check with Novak. www.novak-adapt.com

    They're great to work with and they have adapters for T-18's to GM (B-O-P) bellhousings. Years ago My son and I put a T-18 behind his Dauntless in a '71 CJ5

    Paul
     
    mtruckstuff, Oct 7, 2006
    #2
  3. Oct 7, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    No, very few V6s came with the T-18 and none with the T-98.

    JMO - you're swimming upstream to take the sought-after T-98 for the F134 and convert it to a V6. Very little or no aftermarket support for the T-98 these days. Instead I'd sell the T-98 setup and swap in one of the Muncie 4-speeds or the T-18 with the V6. Either that or sell this Jeep and buy one with a V6, then swap in the 4-speed.
     
    timgr, Oct 7, 2006
    #3
  4. Oct 7, 2006
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    Alot of us Hurrican Jeepers will kill for T-98s that are ready to bolt up. Sell it and pick you up a good T18 or muncie.
     
    Hawk62cj5, Oct 7, 2006
    #4
  5. Oct 8, 2006
    Colorado_Baja

    Colorado_Baja JEEPS!!

    Fort...
    Joined:
    Jun 15, 2006
    Messages:
    304
    I just had my T98 & D18 twin stick rebuilt, it was much less expensive than I thought, no problems finding parts etc.. It will be going behind my 225. Ill take some drivetrain shots when I get it all installed with the body off.

    Greg
     
    Colorado_Baja, Oct 8, 2006
    #5
  6. Oct 8, 2006
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,586
    Call Novak, even thoguh the Fhead T98 is kind of the holy grail of trannies, if it is in good shape, use it, you can kep the input shaft and front adapter and sell it for those who want to mate the t98 to an Fhead, you do not use those parts. But check with Novak they sell the replacement input shafts for the T18 which i think they may also work for the t98 to go in the jeep.
     
    DanStew, Oct 8, 2006
    #6
  7. Oct 8, 2006
    jhuey

    jhuey Michigan Jeeper!

    Indian River...
    Joined:
    Apr 9, 2004
    Messages:
    415
    I think I have a input shaft and front adapter to adapt a T98 in my pile of stuff. Would it be wise to hang on to it?
     
    jhuey, Oct 8, 2006
    #7
  8. Oct 8, 2006
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,586
    Very wise, they are not made anymore. The adapter can be made, if somebody needed one but the measurements have to be noted, the input shaft is the hard part to get. I gave my old input shaft to Nikmil in hopes he will recreate them so that others can enjoy the 4 speed in front of the L/F heads. Unfortunately it is an old tech thing, so it is not a swap that the adpater people are really persuing, but if we could get a place to make the input shaft it would be great bonus for the early crowd.
     
    DanStew, Oct 8, 2006
    #8
  9. Oct 9, 2006
    mtruckstuff

    mtruckstuff Held captive in Detroit..

    Joined:
    Jul 8, 2005
    Messages:
    7
    True on the input shaft, but Novak will make you an adapter plate quite reasonably.
     
    mtruckstuff, Oct 9, 2006
    #9
  10. Oct 9, 2006
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    It took me over 6 months to find a input shaft . I think I got Danstews plates now , the boy who I got them from said they where off someone here and it did come with the input shaft .
     
    Hawk62cj5, Oct 9, 2006
    #10
  11. Oct 9, 2006
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    We haven't forgotten! Just takes money which has been tight for a while. We have to have some other shafts made soon so am going to try and talk the boss into making a few of these for the trial run. Nickmil
     
    nickmil, Oct 9, 2006
    #11
New Posts