AVM Hubs on Dana 30?????

Does anyone know which years wouldve had a dana 30 with AVM hubs? Just tryin to figure out what the donar jeep for my parts was. Thanks for looking.

 

AVM is an aftermarket hub like warn or superwinch, so your gonna need some more info than what brand of hub is on it. Does it have 5 or 6 bolts holding it on? What parts are you looking for??

Kinda offtopic, but you say you have a solid steel front driveshaft how well does that work? weigh?

 

i have what i think is a 66 tux park with AVM hubs. but it is a dana 27. i;m not sure if that helps --- i did hear from tigershark that he had not seen another set of hubs like these. they are pictured on the photo gallery page of this site under locking hubs---along with lots of others. i don't know if that helps but i do believe that they are original to this jeep.---66-or 67 maybe.

it is frame number 10470 but there are no vin plates. the engine number also says it is a 66-67 too.

hope that helps.

ray

 

http://www.earlycj5.com/gallery2/v/picBank/

is where you can go for the photo gallery. i'm not all that internet savvy so i appreciate those little links. i just kind of stumble around otherwise.
ray

 

I just put a set on a jeep here at work, think it was a 74 or so...

 

AVM hubs are still available. Inexpensive option. Here's the link.http://www.4wd.com/newsite/shop/productdetail.asp?pid=1500102
Here's the pic View attachment 13943

 

Like Nepto19 said, AVM are AFTERMARKET HUBS! They are not oem to Jeep. They are a light duty hub but hold up ok to stock use and light wheeling. Nickmil

 

Mine say heavy duty and havnt given me any problems but I am in the process of axle upgrades anyway..I was just wondering if they were oem so i can figure out what the doner vehicle was...I appreciate all the help fellas!

 

read the above