1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can anyone identify these parts?

Discussion in 'Early CJ5 and CJ6 Tech' started by Smoky, Feb 27, 2006.

  1. Feb 27, 2006
    Smoky

    Smoky New Member

    Joined:
    Feb 27, 2006
    Messages:
    2
    I would appreciate any help in identifying what these items are (see attached picture)? I assume that they are Willys items because each one has a “W” with a circle around it. The left item has a “HF14” on one side and “T85B24” on the other side. The right item has a “HF 34” on one side and “T90 A24” on the other side.

    Can anyone tell me if these are parts or tools? What are they used for? Also, if they are for Jeeps, what models and years are they for? Are they considered rare and are they worth anything? Any information on these items would be helpful. Thanks.
     
  2. Feb 27, 2006
    AirForceKnight

    AirForceKnight Grounded

    South Mississippi
    Joined:
    Nov 17, 2005
    Messages:
    116
    T90 is a transmission, but it might not have anything to do with these, What size are they, they look fairly small, but there's nothing to compair it with.
    Personally, they look like shelf holding brackets to me, nothing to do with cars though.
     
  3. Feb 27, 2006
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    They are shift forks for a side shift T-90. Side shift has the linkage going through the driver's side of the case that allows for a column shifter. These T-90's use a plate on top of the case where the normal floor shifter would mount. Nickmil.
     
  4. Feb 27, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    thanks from me too Nick. I was sure they had something to do with a column shift and was "googling" the past 10 minutes and found nothing to prove it. I am glad to see I was guessing right.
     
  5. Mar 2, 2006
    Smoky

    Smoky New Member

    Joined:
    Feb 27, 2006
    Messages:
    2
    1) The left part in the picture is 3 inches in length, 1-7/8 inches in width, and the round portion is 1/2 inch in diameter. 2) The right part in the picture is 2-7/8 inches in length, 1-7/8 inches in width, and the round portion is 3/8 inch in diameter.

    From the responses to my original email, I would assume that the left
    part (T85B24) would be for a T85 transmission and the right part (T90 A24) would be for a side shift T90 transmission. But from the one response, they may be both for a side shift T90. Can anyone straighten out my confusion?

    Also, I've now looked on the web at a number of T-90's. However, all
    of the diagrams and pictures are showing column shifter T-90's and the
    shift forks look very different from the ones in my picture. Can
    anyone post a diagram or picture which would show the shift forks on a
    side shift T-90?

    Thanks for all of the previous information and any future information.
     
New Posts