1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

31's with no lift?

Discussion in 'Early CJ5 and CJ6 Tech' started by ZipTy, Jan 31, 2006.

  1. Jan 31, 2006
    ZipTy

    ZipTy Member

    Evansville, IN
    Joined:
    Sep 22, 2005
    Messages:
    84
    I am going to be buying some new tires and I was wondering if I would be able to fit 31's under it without a lift. Take a look at this picture and see if it seems like I have a little bit of a lift because it seems like it may be a little taller than stock.

    [​IMG]
     
    ZipTy, Jan 31, 2006
    #1
  2. Jan 31, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Should fit.
     
    sparky, Jan 31, 2006
    #2
  3. Jan 31, 2006
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    No sweat. Ran 31"s on flat springs for years.
     
    Boyink, Jan 31, 2006
    #3
  4. Jan 31, 2006
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
    I'm running 31's w/ 3/4" lift from shackles but I have flat springs myself.
    Looking @ upgrading the springs. But I have no problems w/ 31's.
     
    panzer, Jan 31, 2006
    #4
  5. Jan 31, 2006
    Phalanxx

    Phalanxx Jeep Newbie

    iraq, texas,...
    Joined:
    Jan 13, 2004
    Messages:
    363
    im running 31's on stock. no rubbing what so ever.
     
    Phalanxx, Jan 31, 2006
    #5
  6. Jan 31, 2006
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    I'm runnin 31s with 1 Inch lift springs and I have plenty of room
     
    $ sink, Jan 31, 2006
    #6
  7. Jan 31, 2006
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    x2 of what boyink said... my first set were 31's with flat springs (basically sitting on the pads) and it looked good.
     
    gte636p, Jan 31, 2006
    #7
New Posts