1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Koenig Hardtop Doors

Discussion in 'Early CJ5 and CJ6 Tech' started by kross, May 6, 2005.

  1. May 6, 2005
    kross

    kross New Member

    Lawton, OK
    Joined:
    Oct 16, 2002
    Messages:
    9
    Hi Folks,

    I recently purchased a Koenig Half Cab (Jiffy Model #525) for my '61 CJ5 and need some help with the door hinges. Does anyone have some close up images of the hinges that are mounted on the body?

    Thanks in advance for any help.

    Best regards,
    Keith
    PS Thanks for the top Joe :)!
     
  2. May 8, 2005
    65CJ5

    65CJ5 Member

    Albuquerque
    Joined:
    Sep 22, 2002
    Messages:
    156
    I had the full Koenig top and on mine it used "piano" hinges on the doors. The hinges just mounted to the outside of the cowl with 3 big screws. John Shows has that top now, so maybe he has some pics of it.

    Stan
     
  3. May 8, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    Actually Stan, John sold the Jeep, but I'm sure there are pics somewhere. Just an FYI. ;)
     
  4. May 8, 2005
    65CJ5

    65CJ5 Member

    Albuquerque
    Joined:
    Sep 22, 2002
    Messages:
    156
    :shock: OK, I didn't know that. Thanks for letting me know!

    Stan
     
  5. Feb 12, 2006
    whitese

    whitese 1956 Willys CJ-5

    Denver, CO
    Joined:
    Feb 1, 2006
    Messages:
    1
    Here's some pics from a 56 CJ-5 with a Koenig Hard top...
     
  6. Feb 12, 2006
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    half cab:drool:
     
  7. Feb 13, 2006
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    I've got similar hinges on my Konig full top that are on the Myers top I've got. In fact I think I use the same part that mounts to the windshield. Just a different hinge half on the door itself. The bottom is a little different. Kinda hard to see in my pics, but hopefully it gives you an idea.
     
    Last edited: May 1, 2007
  8. Feb 13, 2006
    hardknox00001

    hardknox00001 Sponsor

    Liberty, Tennessee
    Joined:
    Jan 31, 2006
    Messages:
    72
    Hey Brian,
    I have the same type door/ top you have pictured (see avatar). If it is possible, can I get some closeups of the hinge "stuff" that bolts to the Jeep. I have misplaced mine and need to refresh my mind of what I am looking for :rofl:. Did somebody enlarge the side windows on the top itself? The rear window you have is about the size of what I have all around :mad: . On the good side, I guess, is the side windows in my top slide open so you could use it for a duck blind or armored jeep :D

    Thanks,
    Randy
     
  9. Feb 14, 2006
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
  10. Feb 15, 2006
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Allright. The top hinge is very similar to the miyers tops. Not sure if the section that bolts to my windshield is for the koenig top or miyer top.

    The bottom hinge is shown. The part that bolts to the door has a "pin" about 1/4" in diameter that goes above and below the flat metal that bolts to the door. (the hinge will look like a sideways capital "T") Hopefully you can imagine where those "pins" would go on the hinge that mounts to the body.

    Swing the door 90* past open and it will slide up and off both sets of hinges.
    hth
     
    Last edited: May 1, 2007
New Posts