Discussion in 'Member Market' started by Norcal69, Nov 11, 2020.
Thank you for your business!
How much for a CJ6 shipped to 01011 ?
Sliders, not the entire CJ6.
Kyle, how much for just the tubing and standoffs bent and notched shipped to 92553? I want to add them to my existing rocker guards.
After the marginal rocker repairs I've been doing this week, I think a set of these will DEFINITELY be in my future. We don't have too many massive boulders to climb over, but I appreciate the "step" and the added protection just in case. And the fact that it will cover up my wavy sheet metal is an added bonus!
Your looking at $325 delivered to you. I don't have the CJ6 length in stock so it may take a couple weeks to get them made up. Let me know what you want to do.
I will have to check on that. I'm guessing it will be about $100 with freight. That's just a rough guess.
Ok, let me know how to get you paid.
I’ll get them on order.
I have one set of CJ6 length sliders in stock.
$260 plus the ride.
Kyle thanks. They look great. Can't wait to put them on.
Thank you for your business. I cant wait to see them on your rig!
Summer is here and there is still time to get a sweet new set of sliders on before your next trail ride.
Steel prices have forced me to bump up the cost just a tad.
I have one set of cj6 length in stock for $260 plus the ride.
I have two sets of cj5 length in stock for $230 plus the ride.
I have one set of just the bent tubes in 1-1/2"x .095 wall with pre notched spacer tubes for $100 plus the ride.
These are ready for immediate shipping!
Mocked mine up right away. They look great!
Does anyone have recommendations for bolt size/quantity/location?
Also wondering if a anyone felt the need to extend underneath and mount to body mounts like poison spider does?
If you intend to use them as sliders you will definitely need several bolts through the floorboard. IF you do not, they will bend up and put a fat crease down your rocker panel. Just ask Steve how I know that will happen.
I have (6) 1/4" bolts through the rocker and (3) 1/4" bolts running through the floorboard with spacers to take up the gap. All of the bolts have a nice beefy fender washer backing them up against the tub.
Thanks for the reply! I did (6) 3/8” bolts through the rocker so far. I’ll look at where I could add some bolts and spacers on the under side.
Kyle are you going to have any 6 sliders made up in the future. Don't need them right away, but if you have them now let me know or if not, no big rush.
I have a set of CJ-6 length sliders in stock!
I’m interested in a set of late (‘72-‘75) CJ-6 and an early CJ-5 set. Shipping to 97086 Happy Valley OR. The late CJ-6 should be the same as early as I don’t want them to extend to the fenders.
Best contact is at firstname.lastname@example.org
No rush but let me know when you can and payment method.
Separate names with a comma.