1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

F134 engine carb

Discussion in 'Early CJ5 and CJ6 Tech' started by TjWheelin85, Apr 20, 2005.

Page 2 of 3
  1. Apr 20, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    the YF carb on the F head is a military version, the 90* bend
    it is not the L head carb
    but you already knew that, I'm slow
     
    jpflat2a, Apr 20, 2005
    #21
  2. Apr 20, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Apr 20, 2005
    #22
  3. Apr 20, 2005
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23
    so the 'airhorn' is prettymuch the part that mounts from the top of the carb, goes sideways to the intake filter? And you don't think it will work on my oilbath intake?
     
    TjWheelin85, Apr 20, 2005
    #23
  4. Apr 20, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350

    It should..........I forgot you have an M38 also...... :rofl:
     
    blevisay, Apr 20, 2005
    #24
  5. Apr 20, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    might be 2 different diameters
    no experience here with the solex
     
    jpflat2a, Apr 20, 2005
    #25
  6. Apr 20, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Solex makes no difference, it's the air horn that sits on top, I was trying to figure out if that diameter was different where it went to the rubber tube that went to the oil bath air filter. If that makes sense.
     
    sparky, Apr 20, 2005
    #26
  7. Apr 20, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    The gud news is you have the right Solex!

    You will like it too........
     
    blevisay, Apr 20, 2005
    #27
  8. Apr 20, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Yeah, just buy the air horn and put a K&N on it. R)
     
    sparky, Apr 20, 2005
    #28
  9. Apr 20, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350

    Donaldson :D
     
    blevisay, Apr 20, 2005
    #29
  10. Apr 20, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Or that too. ;)
     
    sparky, Apr 20, 2005
    #30
  11. Apr 20, 2005
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23
    what kinda K&N should i put on it... i might just go with a full on snorkle... the rest of the trucks already waterproofed... why not just raise the intake up to 7FT high... then i can try driving through my pond... i'm just glad i have the correct solex. i'll get the air horn and be good. thanks guys.
     
    TjWheelin85, Apr 20, 2005
    #31
  12. Apr 20, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    wait.......hold on....................................................
     
    jpflat2a, Apr 20, 2005
    #32
  13. Apr 20, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    Pics!
     
    blevisay, Apr 20, 2005
    #33
  14. Apr 20, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    Look Jims on it! :beer:
     
    blevisay, Apr 20, 2005
    #34
  15. Apr 20, 2005
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23
    I haven't drove through the pond yet... i've gotta get the thing finished, which means spending 1400 more bucks this week and then it's good to go. then i'm going to have to get really drunk to talk myself into driving my baby into a pond and then i'll get pics...
     
    TjWheelin85, Apr 20, 2005
    #35
  16. Apr 20, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    I have Joels F4 here at the house
    has an oil bath and the YF
    just measured both ods................and the verdict is..........













    air horn and oil bath have the same 2 7/16 od; so the hose will work

    {applause} taking a bow now ...................
     
    jpflat2a, Apr 20, 2005
    #36
  17. Apr 20, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350


    Another Mystery solved!!!!!!! :beer:
     
    blevisay, Apr 20, 2005
    #37
  18. Apr 20, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Now that he knows the diameter, he can measure his and tell us what it is. My concern was it looked smaller on his A1 than did my CJ-5 flexible hose that went from air horn to oil bath. But that was a long time ago. ;)
     
    sparky, Apr 20, 2005
    #38
  19. Apr 20, 2005
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23

    good to know.
     
    TjWheelin85, Apr 20, 2005
    #39
  20. Apr 20, 2005
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23

    what are you trying to say Sparky? you saying my hose is a little thin? hahaha. I'll find out tomorrow, i'm not walking down to the barns right now. it's dark and i'm lazy.
     
    TjWheelin85, Apr 20, 2005
    #40
Page 2 of 3
New Posts