1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Trans cover differences?

Discussion in 'Early Jeep Restoration and Research' started by wheelie, Apr 14, 2014.

  1. Apr 14, 2014
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,514
    The one on the right came out of this '56 cj5. The one on the left came from a later model but, not sure what year it was. It was a while ago. I never knew there were differences, aside from the 4 speed type.


    [​IMG]

    [​IMG]
     
    wheelie, Apr 14, 2014
    #1
  2. Apr 14, 2014
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    There are many differences in the floor covers over the years.
    The one on the left in your pic was for a CJ equipped with the single stick 18 transfer case where the shifter came through the floor cover by the firewall.
     
    nickmil, Apr 14, 2014
    #2
  3. Apr 15, 2014
    jpc

    jpc Sponsor

    Mead, Co
    Joined:
    Sep 5, 2010
    Messages:
    115
    What nickmil said. Also I believe that the single stick was used in all 225 V6 applications with the T14A transmission.
    My Oct69 1970 CJ5 has the one on the left.
    The side part had a hole cut in it for the OD shifter.

    [​IMG]
     
    Last edited: Apr 15, 2014
    jpc, Apr 15, 2014
    #3
New Posts