1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Frame width

Discussion in 'Intermediate CJ-5/6/7/8' started by High5, Jan 29, 2014.

  1. Jan 29, 2014
    High5

    High5 Member

    Urbandale, IA
    Joined:
    Jan 13, 2005
    Messages:
    802
    Hey guys been too long. I'm back working on the jeep and building bumpers. I have looked but was hoping someone could either measure or just tell me how wide our stock frames are inside to inside on the front end? Would really appreciate the help. Need to cut the holes for the mounts/d ring mounts and my jeep is in storage a couple hundred miles away.

    Thanks
     
    High5, Jan 29, 2014
    #1
  2. Jan 29, 2014
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    What year Jeep? If '75 and older 27 1/2" center to center of the frame rails.


    Sent from my iPhone
     
    nickmil, Jan 29, 2014
    #2
  3. Jan 29, 2014
    High5

    High5 Member

    Urbandale, IA
    Joined:
    Jan 13, 2005
    Messages:
    802
    Sorry,
    Yes '75. I plan on having the mounts vertical and tight to inside of frame rail. Wish jeep was here could easily take measurements. Thanks for the help though.
     
    High5, Jan 29, 2014
    #3
  4. Jan 30, 2014
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
    The manual at oljeep.com will have a dimensional diagram in it.
     
    nwedgar, Jan 30, 2014
    #4
  5. Jan 30, 2014
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,838
    Lots of measured drawings on google or bing images.
     
    PeteL, Jan 30, 2014
    #5
New Posts