1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

'88 manifolds on a '76?

Discussion in 'Intermediate CJ-5/6/7/8' started by Grumpy_one, Sep 11, 2013.

  1. Sep 11, 2013
    Grumpy_one

    Grumpy_one New Member

    Happy Valley
    Joined:
    Nov 29, 2009
    Messages:
    45
    I have a chance to pick up a set of '88 intake/exhaust manifolds to do a single draft to a double barrel set up. I want to go to a MC 2100. Will the '88's work on my '76? This is for a 258
     
    Grumpy_one, Sep 11, 2013
    #1
  2. Sep 11, 2013
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Yes, they will fit. Be sure to get the throttle cable bracket and bellcrank that bolts to the intake manifold - it will make your installation much easier. Has to be from a carbureted 258, not a 4.0L.

    I'm running manifolds from an '85 CJ on my '77 J10. You may have to notch the power steering bracket a little. You'll have to modify your 2100 to pull down on the throttle rather than pull back, and buy an adapter for the carb base.
     
    timgr, Sep 11, 2013
    #2
New Posts