1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Correct Spicer/Dana U-Joint

Discussion in 'Intermediate CJ-5/6/7/8' started by steve1973, May 3, 2013.

  1. May 3, 2013
    steve1973

    steve1973 Member

    Nolensville, TN
    Joined:
    Jul 27, 2011
    Messages:
    90
    I'm sure this has been posted before, but... What is the correct Spicer/Dana u-joint to use in a 1973 CJ5?
     
  2. May 3, 2013
    fixitcj5

    fixitcj5 New Member

    San Diego, CA
    Joined:
    Mar 1, 2013
    Messages:
    16
    I do believe its the Spicer 1310 series
     
  3. May 3, 2013
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Propellor shaft joints are Spicer 153x. Dana 30 front axle u-joints are Spicer 260x.
     
  4. May 6, 2013
    steve1973

    steve1973 Member

    Nolensville, TN
    Joined:
    Jul 27, 2011
    Messages:
    90
    Thanks Guys...Just to much info on the net sometimes to weed threw.
     
  5. May 6, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,118
    Axle U-Joint: 5-260X greasable u-joint
    5-760X Non-greasable -joint

    Drive shaft u-joint: 5-153X

    For axle u-joint, non greasable are stronger, i always run them, never had a failure yet.
     
    Shad Rogers likes this.
  6. May 6, 2013
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Uh, the 760x joint is for Dana 44 sized yokes and will not fit a stock CJ Dana 30 axle yoke. The 760x is the later forged version of the old 297x Dana 44 u-joint.


    Sent from my iPhone
     
  7. May 7, 2013
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,118
    Oups my bad, sorry
     
New Posts