Don't get me wrong, I appreciate the help I get from these forums. You guys really helped with my recent carburetor swap. I use other sites for...
You're waiting for the wrong pilot. For 3/8 fine the hole size is .332 A 5/16 will work ok. it will dance a little. I made my own when I did...
At the bottom under posting permissions it says I may not post attachments???
OK so I took your advice and bought the 2100 from Gronk Performance. So far very happy. Several emails back and forth before purchase and...
Thanks to the great advice (I hope) I purchased a 2100 1.08 from ehrmann (Gronk Performance) thru ebay. He says the same kit works for the 258 and...
Now I'm learning more on the 2100s. They come in different sizes? Sounds like the 1.08 would be best on the 225. Opinions? Lots of info on putting...
That helps. I sent a mesage to the ebay guy to see if he had a kit for a 225. The adapter may be an issue as Summit lists a Sep. delivery. Exeter...
First, Thanks for all the replys, I don't post much here but read a lot and a lot of my Jeep came from here or sites like Warlock's. I've had the...
I am considering replacing the 2gc on my 67 225 with a Holley 350cfm 2 barell 0-7448 and the Offenhauser 5895 adapter. I searched the threads and...
[IMG][IMG][IMG]OK,you guys got an old fart who doesn't face, twit, text or snipe to try something. Any way if it works here are my homemade 15x15...
That makes it kind of tough. Other sites you do it direct. What is different about this site?
I am new to this site and can' figure out how to post pics. I use other sites and it is usually in the go advanced section. I will post some pics...
Back in the day I cut and widened quite a few stock rims. I still have a set of 15" wide jeep rims. You don't cut the center out, you lathe cut...
I found in another thread a place called Waldrons Exhaust (www.Waldronexhaust.com) in MI. I sent them a note asking if they make a Y for the...
I have Novaks on my 67 225 that I am rebuilding. Now I have to figure out how to put pipes to them. I'm thinking y them and then down the right...
I bought one of those Phillipine bodys for my 67 CJ5 last year form Morris 4x4. They had them on sale and free shipping and a rebate. It seemed a...
If you want to get rid of the 2 piece let me know. It will work with my front box and I have been looking a while too. Trouble is up here in NY...
Thanks, no seat or floor and trying to put the steering wheel in a comfortable spot.
I am building a 67 CJ5 and doing the steering conversion. I am building my own column using the tube out of the old ross box and making my own...
I have been searching all over this site for half an hour now and give up so I'll ask, excuse me if it's an old topic. Any body have a spare power...
Separate names with a comma.