i use a short funnel w/rubber hose pushed on it .... and access it w/long extension as well
my plow pump(monarch electric,cab mounted) says to use only sae 10w fluid. its tough to find. i see in conversion charts that it crosses in...
my 67 has dual resivoir and step bore so it must be late 67 cj5 and 10" brakes.
got my master cylinder back from white post restorations and installed. looks like brand new and works like new w/ a lifetime warranty ! now the...
thanks for your input. it does seem to good to be true. i'll look at other options.
anybody have experience with the electronic distributor offered on line to replace the stock points dist? i gave a 67 w/l-134. seems like a good...
i am sur its a good idea to ck the kingpin bearings as i'm sure it needs them. steering is pretty stiff but i am running out of money this season...
well after talking to several classic parts and restorers people all over the country. i talked to abs in california and said he did not have a...
hey ERICM mine is exactly like yours. i found your old post. i have looked up 69 w/10" drums and came up w/ a number, centric 130.63008 mc, but...
i looked up for 69 and they had no match. there must be something different. and the push rod piece is different. mine attaches to the mc. that...
i looked at this, it says 64 rambler with a note on the page since i looked for my particular year of "will not fit your 67 cj5" will others work?...
i ck'd at advance and they had no listing for 67 W10" brakes. it has a single bolt lid hold down not like the newer versions just wonder if any...
btw i did not hear back from herm.
yes i bench bled it. its my understanding on the repl bolt in kit that that is a replacement for 9" brakes w/single resivoir. mine already has a...
1967 cj5 10" brakes. i have put all new wheel cylinders,lines, went through master cyl(it seemed ok. ) and bled, bled bled,even used apower...
thats the exact kit i got from 4wd.com (hardware.) for like 14.00. thanks!! i will cut the felts. you guys are a big help.
the seals came from 4wd hardware and they are 1 piece w/no split. they say you cut them. however i not heard or seen anything on the felts? i...
the replacements are one piece rubber with a metal strip incased. i've seen posts where they say to cut it on an angle and place the cut area at...
hello, Do I need to remove the front knuckles on a 1967 cj5 to repl the seals and felts? i,read you can cut the seal but nothing on the felt? do...
I have a 67 cj5 that I am putting a plow on. i was given two mounts w/the jeep for a meyers plow and i was told one of these were on this jeep at...
Separate names with a comma.