fab was what i was thinking Ogre. I was just hopping there was a easy fix. Anyone got any photos of a custom single stick fab job..
I am in the middle of swapping out my 3-speed with a th350 auto. The first problem I see it that the single stick linkage on my d18 is hitting the...
Thanks Duffer. I guess I have a tee. Is it on the m/c or on the frame. Two brakes will be better then the no bakes I have now. I just know its a...
I have a 1947 Willys at my farm and the brakes need help. I rebuilt the m/c last year and it helped but still losing fluid. My question is can I...
It's the flat washer that is installed behind the snap ring in the mc plunger. Easy fix. Did it last week to my 71. Posted via Mobile Device
Posted via Mobile Device
Thanks for the help. I'll check the base and linkage and see what happens. Posted via Mobile Device
I took some video to explain my first post http://www.youtube.com/watch?v=LvpZ_HB2ok4 http://www.youtube.com/watch?v=yKVzJnWNOQw Check out what...
WTB a rochester carburetor throttle base plate. You have one or have any questions email me joeriscky@gmail.com Posted via Mobile Device
That's what I'm thinking. Can I buy just the throttle body plate or do I need to get a whole new carb? Posted via Mobile Device
Timgr, the idle will drop if you screw in the two mixture screws. i will check and see if it will stall by turning the idles stop screw. it has a...
I only see one screw on the side of the carb.
if it was the idle screw then it would stay at low idle. when i tap the gas it goes back to normal idle and will stay there till i stop again. it...
i have a 70 cj5 with a stock 225. It idles fine sitting in the driveway(750-800) but when i drive down the street and stop at the stop sign it...
2 2"x2" rubber plumbing elbows 1 2"x4" PVC reducer 24" of 2" PVC pipe 1 air filter from the local auto parts I also made a bracket that holds...
Did you know Home Depot sales cold air intakes for early cj5's. http://i872.photobucket.com/albums/ab283/jojoriscky/photo5.jpg?t=1273702407...
My v6 is having a problem. When you start it up it runs and idles fine (850 rpms). Then I dive down the street and it runs fine but when i stop...
I'm going to start with the oil pan.
Separate names with a comma.