OK. 74' 304, Edelbrock intake, truck avenger carb, HEI, gapped at .050 and fenderwell headers. Why is it back firing out of the exhaust badly....
So I just got my HEI from bulltear. I also installed a truck avenger and full tune up at the same time. I have 100% guarantee on fuel and air, but...
SO I finally got my intake and truck avenger on, so I thought I'd pout the HEi in as well. Is my wiring correct? The stock black, red, yellow...
I am adding power brakes during my build. I am using a corvette MC and CJ booster. Whats the best place to tap in for the vacuum needed for the...
OK, so I am planing out rewiring my 74 (304/NP435/Dana20) The wiring is stock 74 and on it's last leg and since I plan on fuel injection and HEi,...
Who has done the 435 swap that can give me some solid answers? This will be behind my 304 that came with a T15 (74') I have a line on a 435...
OK, another power steering question. My 74 has manual saginaw box that uses 3 of the 4 bolts. I picked up the engine bracket and pump today and...
I am swapping in a set of dana 44s with disc front and rear. My 74 has drums all around, so I'm planning on possibly swapping in a YJ booster and...
Since I am not at my jeep now to pull the box, does anyone know what's the spline count of the 74 non power box...at the column and box? I'm...
OK, so while have gotten the 74 driving and works well, I have an axle problem. I have drum brakes all around, and want disc and power brakes. I...
I just scored a Meyers steel hard top for my 74 for $180. Just surface rust on the top and all the glass is perfect and windows roll up and down...
I should get the 74 up an running in the next few days, but I have a spline count question. I have an old JY Dana 30 lock right from years ago....
So here is the latest project I just picked up. It's a 74 with a 304 and 3 speed. It's been sitting for about 10 years and hasn;t been inspected...
OK, what are you experiences with the must do's when starting a Jeep that has been stored 10 years? Here's my list, so add what other tricks you...
Separate names with a comma.