I'll take a look at how bumping the timing will affect the symptoms I've described. Thanks guys!
I think you just discribed something I'm feeling in the pedal, "dead spot at slight acceleration". That's what I feel as well...always have (with...
What is yours set at now (after bumping it up a bit)?
Thanks Tim, I didn't think of that circuit. I will look into this and post the results.
Problem: (This has happened since I've owned the Jeep)(Motorcraft 2100 & 304)('76) - Happens primarily in the lower gears (not as noticable in...
Thanks CJ5Kyle. I completed the other side. Here's some pics of the finished product: [IMG] [IMG] [IMG]
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG] As you can see from these new photos, I decided to go with some different tubing. These are from...
Ok, it's been too long without me getting some more detailed pics. So, here we go: [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]...
Thanks for the feedback guys, it's appreciated. 69Willys, I can do that no problem. It may take a little time gathering the right pics, but be...
Here's how it looks with everything together: [IMG] [IMG]
I thought I would show you guys what I just got done doing for my "dual" air cleaner idea. I took 2 factory air cleaners, cut & welded them...
If anyone was curious about the size/weight of this bumper/carrier & how that affects the crossmember, here is the solution I used: [IMG] There...
nickmil & aallison, This is a very interesting subject to me, one that I'm wanting to do in the future; swap a T150 for a T18. When you say a...
Sorry for the delay guys, like all of you I imagine, I was involved w/ a lot of Thanksgiving festivities (mainly intake). I know, I know, enough...
After much thought & deliberation, I have decided to paint the bumper & carrier instead of powdercoating. One of the main reasons is cost, but...
I completed all of the welding/fabricating and only have some finish grading to do now. Here's how it looked with everything together before...
I got the latch installed last night. Here's a shot of the swing-stop base & the latch: [IMG] [IMG]
Sorry, that icon should be an "r" (334-r). I didn't realize a capital "r" would post as an emoticon.
Thanks guys for the kind words. Earlswrench: I got the spindle here - http://www.atozfabrication.com/store/home.php. I understand, sometimes...
I've been "planning" to start a thread for my build for a while now...I just never remeber to do it. So, I thought I would at least show ya'll...
Separate names with a comma.