My collection of fasteners included in my basket case is getting low. On the second reassembly after the timing chain some dope timed it 180 off....
Item one-the oil bath...it looks fine, just a little dirty and grimy...I cleaned it somewhat with a parts washer but since its a sealed unit, is...
Hunting season is coming up again and I need to get back on the old jeep. In reinstalling the timing cover oil pump, do I hog the whole area...
okay so in reinstalling this timing chain cover (68 oddfire) I notice that I have more holes than bolts from when I took it off. I see there are...
Hunting season is near so somebody needs to quit screwing around and get this jeep back together. First thing, the new seal for the timing cover...
I trying to line up the timing gears to both at 12 for TDC before I reinstall the cover, they don't seem to line up. more like a 12 and 11:30....
I just replaced the timing gear set on the 68 225 oddfire. The spec I found on the tork said 40-55 lbs. That seems like a pretty wide range. Is...
In mt search for parts of the fuel pump, I come across this. The timing chain tensioner is touching the chain, but not really doing much. In the...
Since my cj would not pump its own fuel, I decided to pull the pump off and replace it. Upon removal I notice part of it missing. Any ideas on...
Is there a section on fine tuning the 2G manual choke small orifice carb? Thanks
I have my pile of parts from the back of the jeep. I have new exhaust gaskets. Please correct any error in my beliefs. The exhaust manifold to...
I am back on track to try and make this old 68 jeep run again. Someone decided they would rework the whole thing and abandoned the whole idea...
okay I will be ordering a kit for the carb to rebuild and now my next question is in the wiring. The PO cut the loom of wires going through the...
My basket case seems to have two carbs laying in the back of it . One identified by look only as there seems to be no ID tag or numbers stamped...
Separate names with a comma.