Yeah, apparently. Found this at 4wd.com, http://www.4wd.com/productdetails.aspx?partID=12134, looks like the same as mine; only $31. I was...
I lost my only key and am trying to remove the ignition lock cylinder so that I can take it to a locksmith and have a new set of keys made. I...
My 73 CJ-5 has been running perfectly for some time now, but just yesterday I got in and turned the key... nothing. It didn't even try to turn...
Thanks for the advice. I ended up ordering the http://www.summitracing.com/parts/ATM-2421/ and the http://www.summitracing.com/parts/ATM-2592....
Hey guys, I have a 1973 CJ-5 with aftermarket Sunpro oil pressure and voltmeter gauges in the dash. I'm trying to keep everything as close to...
Just got it in. The Walcks link above is the correct one. It was under $10 and the quality over the cheap one I got off of eBay is apparent.
This one (http://www.walcks4wd.com/product.aspx?pid=2108) is the most expensive out all I saw, but is still cheap. The gloss looks right; I'll...
What was the quality like? I could tell from a high res photo if it is what I am looking for, but the one on the auction is not good enough.
Oval Shape #60 looks to be the closet to what I am looking for style wise, but have you ordered these knobs before to know if they are the heavy,...
I've looked through most of the sites I know of and on eBay, but i keep finding the average plastic looking rubbery feeling shift knobs. I'm...
Coming back around to close the loop on this thread. I initially posted back in February when I first got the CJ and only just recently finished...
Ok, finally got around to installing this with the help of some friends and am posting on the results. It turned out great. I was able to reuse...
Glad to have seen this post. I have the lean and was already planning on putting on my spare carrier and tire sometime in the next few weeks....
I'll head over to ACE hardware this weekend and see what my washer options are. My tires are 9.5 wide and look like they will fit, but I'll find...
OK, so my 73 already had the holes drilled on the side for the spare tire mount. I ordered what 4WD.com said was the Omix-Ada/OEM spare tire...
I've got a 73 CJ-5 with the Borg-Warner T14a 3-spd Manual and Dana 20. Lately I've noticed that if I put her in first when completely stopped...
Thanks for the replies. I had actually already contacted Mike at Austin Jeeps and he was very helpful; the only frame he had was out of my price...
OK, here is a photo of my clean, but empty under-dash. You can see the hood vent and the black glove box. I'm sure stuff is missing, I'm just not...
Excellent, thanks. If the leads I have out there don't pan out I'll get in touch to copy your setup.
Thanks. Yes, I haven't found a single source, likely because there aren't any. Even the surplus/salvage shops I have called don't know where....
Separate names with a comma.