Somewhere over the about ten years I have had my jeep. The clearance between the shaft and my driver side shock mount has been reduced to 0. My...
Howdy guys, well I finally got back to work on my cj5. I installed an xj (gm) steering column in my 73 cj5. The new column has a double D end. My...
Thats No joke. 1973 cj with 3" lift 33 inch TSL [IMG] [IMG]
About a month ago I changed out the old rear main seal. The new one leaked. So I redid it last week. After a couple of days it leaks. I realize...
I am on my third clutch in my 73 cj5 (304 T15) since I owned it about ten years. I installed and setup this one the same as all the other...
I have a set, I made mine from a set of soft doors and cut out the vinal.
LOL I just had this problem last week. I got another crab overhaul kit, the only way to get a Power value for the jeep MC 2100 quickly. It...
I had a car that did that to me, when the car heated up the coil would loosen up and start jumping the timing arould. In your case warm up the...
Got all the adapters, bellhousing, and fork. However my new question is: Do I need to get new driveshafts?
opps I got mixed up. Thanks Hudsonhawk. I might just remove my balls them.
Twin stick was one of the best things I did to my 73. As for the balls you can pull them out and have 2 low. However you do not have any detents...
Tim was correct it was the terrain. Only pic i had of springs opening up. Uncamoknkey, great option for nwedger nwedger, My jeep had the 10...
"Wow, those are some really, uh, long shackles..mehh " Temp fix. got to love autozone lift in a box.
[IMG] Another jeep that I help set up. Notice the gaps in the springs.
I cut my clips off. To free up articulation. I have more then 33" of wheel travel. I need longer shocks and brake lines. Should have more...
I ran steel on wifes jeep. Only rubber hoses as flexable joints. I am still concerned about the heat transfer from the exhaust. Side note,...
Check with some upholstery shops. I had my seats done for $125.
I cut my clips off to improve flex. If you must have them cut them off and use hose clamps. I dont think the clips are the problem. They should be...
I would double check the adjuster. The reason why I started from the ground instead of strait to the the box was: Theres a guy in town that has...
I would check the jeep out before installing PS. PS might make it worse. Lets start from the ground up: What tire psi do you run? I like 23 on...
Separate names with a comma.