I've gotten most of the wiring into this CJ7, but all the emissions stuff is missing and it had been chopped on some so if anyone has a nice...
After putting the front end on this CJ7 I've been working on, I have some alignment issues. The tub is perfectly centered over the frame and the...
I'm putting new wheel bearings in a '79 CJ7 with model 20 axle and one-piece axle shafts. Upon disassembly the ends of the axle shafts have been...
I'm into the details with a local restoration shop on the body for the '79 CJ7 Renegade I've been tasked with reviving, one of which is what type...
Pulled the driver's side rear axle shaft on the '79 CJ7 I'm working on to fix a leaky seal, and found some strange wear on the end of the shaft....
I'm working on a '78 CJ7 w/304, and the owner's summary statement was, basically, make it dependable. Somebody before them had messed with the...
I assume the AMC DJ5's are a close enough relative to the intermediate CJ's that this belongs here, so here' goes: What years were ball joints...
Just glancing through the new Quadratec catalog I noticed they sell the cold air intake hose for the AMC 150-equipped CJ7's. My sister's '84...
Finding the tarp blown off my L-head after an overnight wind storm and water standing in the intake manifold was the kick in the butt I needed to...
Was just browsing through some build threads and saw mention of Willys Overland's Repli Tubs. How do these compare to the original tubs and to...
Do the flathead and F-head 134's use the same carburetor? If not, will they at least mount up and run on either engine? Thanks. :)
Okay, so I'm not quitting, but the new Wrangler is growing on me. The 3.6L Pentastar engine hasn't been in the JK's long enough to reveal all its...
Dad's looking for a new MC for his '69 DJ5A, and his FLAPS told him it's not available. Is this MC any different than a '69 CJ master cylinder?...
http://stlouis.craigslist.org/pts/2761009349.html If it is really a DJ-6 chassis, is it worth that?
Were there two different variations of thermostat housings used on the Go-Devil? Most pictures I've seen of them seem to have a T-stat housing...
How many/which of the gaskets out of this set will fit my L-head?
What's the correct color for the shocks on my '62 DJ3A? Gloss black?
While talking with a friend today, he informed me he has a full hard top for a CJ5 that he'd sell. It looks like a Koenig top from pictures I...
What are the differences between the T-90 and T-96 transmissions? The T-96 looks smaller (probably not as heavy duty?) but how, exactly, are they...
I came across this picture: http://inevo.com/wp-content/uploads/2009/10/OldJeepHDR.jpg and a question popped into my head; Is it, in any way,...
Separate names with a comma.