How about the distribution block? Is it the correct size/year for yor MC? Just a thought.
I turned the key in my 81 Scrambler only to have it rotate completely with no responce from the starter motor. The key did not spring back to the...
Im puzzled by the 2 apparent fuel connections on top of the fuel bowl of the Carter 1bbl. One has a female threaded connector and the other is a...
Does anyone have any information or knowledge of an option for a low compression 258 6cyl engine? I have a 258 in my 74 CJ5, not sure if it's the...
Just for the record the gear is intended for an MSD distributor. I had to dill the gear through and use the roll pin. Pain in the butt!
I did call Bulltear. I always get voice mail. Their products are great but they take a few days to resopnd to phone messages or email. Not sure...
I just purchased the Bulltear bypass kit. I needed a new timing cover and decided get the bypass as well. I understand that the manual bypass on...
I too have done 3 HEI upgardes. Each one with distributors from Ebay vendors for about $150.00 to $300.00. All worked well. The expensive dist...
I purchased a matched set of cam/distributor gears from Bulltear. The distributor gear does not have the retaining pin hole drilled all of the way...
A friend advises me not to reuse my flywheel bolts. Im reassembling a fresh 360 and planning on reusing the bolts. Any opinions would be appreciated.
A Trans drop would be about 6" to get the angle down to 15 degrees and that would still be steep. Does anyone know the stock driveshaft angle of a...
[IMG]This is 74 Cj5 6cyl (258) with a T18 and Dana 44. It has 2.5" shackle lift, spring under and a 2" drop in trans bracket. I have assembled...
Thanks, I've added a photo. Is it easy to replace? I do want to do a fair amount of street driving.
I have opened the diff cover on a new project cj5, 1974, to find the differential is locked. It is not welded it appears to be a spool. It does...
I have a 1974 Cj5 with dana 44s front and rear. The rear seems to be locked all the time! I'm not sure what would cause this.This is the first 44...
I'm in the process of converting 74 cj5 258 from manual to power steering. I need a double v crank pulley and cant seem to find one. Anyone know...
What I mean by power steering is the pump. The pump is on the passenger side, the gear box is of course on the drivers side. Im looking for pump...
I have a 74 CJ5 and want to convert from manual steering to power. From 72 to 75 the power steering was mounted on the passenger side. I can't...
Does anyone know where I can get power steering brackets for a 1974 CJ5. The power steering was mounted on the passenger side of the engine from...
I know this part as the "distribution block". I have an extra distribution block if you need one.
Separate names with a comma.