I'm looking at making some aluminum diamond plate corners and rocker guards.My main question was the best way to cover the step by the front...
I thought I had read somewhere that the 44 had a 19 spline shaft and the 41 is 10 spline.
I have a '48 2A with the dana 41 rear.I'm running a Ford 260 V-8 and have a chance to pick up a''51 3A for parts [ frame damaged and rusted body...
Thanks for posting the pics.Only one seemed to have shown up for some reason. From that photo I can't tell if you ran the aluminum all the way to...
I'm looking at making a new dashboard for my CJ2A. I was wondering if anyone has an pictures of ones made of aluminum or steel. Thanks
31-10.50-15
Thanks for the info.The other question I have is some info I have found says to tap the end of the axle shafts to seat the bearing before you...
Thanks.I have the specs according to the Jeep Rebuilders Manual;0.001"-0.006".The main thing I was wondering is if all I need to do was put the...
I have a question on the rear axle shims on my 1948 cj2a.I am putting on 11" brake drums and when I removed the 9" drums I took off the shims and...
Anybody using cherry bomb super turbos? Barry
Thanks.I thought the hub should work.I have access to a 30 ton press,I was wondering if that would work for pushing the studs out if I support it...
I have a cj2a with a ford 260 v-8 and headers,I was wondering if anyone has tried the flowtech afterburner mufflers or the dynomax super turbos....
I have a question on an 11" rear brake conversion on my cj2. I got some parts from a 1966 wagoneer with the tapered axles but it was missing the...
Separate names with a comma.