1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

diamond plate

Discussion in 'Flat Fender Tech' started by bear1948, Nov 29, 2009.

  1. Nov 29, 2009
    bear1948

    bear1948 New Member

    Montana
    Joined:
    Oct 3, 2007
    Messages:
    13
    I'm looking at making some aluminum diamond plate corners and rocker guards.My main question was the best way to cover the step by the front fender.Any pics would be great. Thanks
     
    bear1948, Nov 29, 2009
    #1
  2. Nov 30, 2009
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,934
    i made my side steps out of old running boards. I covered the side steps with a little strip wraped around and a plate cut to fit on top of it. simple. they even have a lip already bent on the bottom to add strength and protection
    [​IMG]
     
    jeep2003, Nov 30, 2009
    #2
  3. Dec 1, 2009
    brian h

    brian h New Member

    Vacaville C.A. 95687
    Joined:
    Mar 15, 2009
    Messages:
    36
    Re: diamond plate/rocker guards

    Its not aluminum for the rocker guards, but it could have been done in steel diamond plate 1 1/2 angle and some 3/16 plate
    [​IMG]
    [​IMG]
    the original steps pretty gone
     
    brian h, Dec 1, 2009
    #3
New Posts