Bought a 14' canoe and didnt want to lay it on the Bikini top. Glued together some 1/2 " pipe along with drilled plates so it can be removed to...
Trying to plan ahead before pulling floor panel. Id like to run a hose vent line to a higher point and am wondering about stock vent cap or button...
The solar powered auto darkening lens on my helmet died the other day. Cost to replace the lens is $135 :shock: Decided to give one of Harbor...
Awhile ago when I trailered my CJ, I got tired of the chains and binder hassle. I decided if these were good enough to tie down loads for a big...
In the process of installing Herms OD and have run into a snag. I'm installing the planetary unit onto the splined shaft ( 6 ) and I rotate it...
Trying to get info ready to order an overdrive from Herm but ran into a snag: Transmixup case is marked T-18 1B ( Got this from Archer Bros...
I'm bored right now so thought I'd try to do something useful) Anyway, I wanted the ability to drop or remove the windshield and still have...
At 6'6", 325 lbs, my brother was having a hard time swinging his right leg inside, past the cage post etc. As we are both long time bike riders,...
Wanted to get the correct belt angle as well as keep them off the floor away from dirt etc. Used a large plate underneath to prevent pull-thru (...
I decided there was going to be too much going on " out back " to open the tailgate so I came up with this mess. Holds the spare, provides a rack,...
No problem with cooling. Out of harms way as well. :smash: [IMG]
Sorry if this idea has been posted before. Thought id pass on my under hood storage system using ammo boxes. The three boxes provide easy access...
Separate names with a comma.