Sweet! looks really nice!
[IMG]
I used about 65psi on mine. My 225 didn't have seals so I used the ones for a 231 and they fit perfect. They had 2 outer springs. I took the top...
This is what you really need! http://www.cruisercustomizing.com/uploads/TGUNMOV.mov
Rochester 2G!
Heres the deal. When I purchased my 71 with the V6 It ran ok but needed a tune-up. The carb screws were really loose especially on the top they...
Here are the numbers off the carb. 7041185 336 01
Here is the Napa kit #2-5478 if that helps you any. Maybe they can cross it for you. If not let me know and I'll get the #s off my carb for you.
I would try a hone for a wheel cylinder and see how it goes.
Update on first post!
Thats right! Heck the 4 caster wheels would probably cost that much. Nothings cheap anymore.
I'm glad you live so close to me so I can borrow it when your done.:) On a more serious note when your done let me know if you want to sell it or...
This is the same one I used. The tube is one piece machined down for the races and not 2 two pipes welder together to create a sleeve for the...
Electric Lime Green Pearl. [IMG]
Yeah the ones they sold me are different then any I have seen before. They are whitish and look just like a plastic pop bottle cap only a little...
I picked up some valve stem seals from Napa for my 225 V6 but Mile-Hi Jeep rebuilders said they didn't come from the factory with them. Is it...
No NOx readings were on the sheet.
I have them turned in as much as possible(about 3/4 turn out). What do you think about jetting it down some? My HC PPM readings were 128 at...
Emmisions UPDATE!!!!!!! I took my 71 V6 for its test on Friday after tuning it up and the readings were super low and passed with flying colors...
Separate names with a comma.