I love seeing these catch on as an early Jeep option. I never thought I would see a narrow track D44 new for $1100 in my lifetime! While the...
What brand springs? Looks perfect to me!
Cool, thanks. I will try and pull the drum brakes off the D30 tonight and get a real spindle to play with. I imagine back when the spindle...
Thank you for the info...thats a good starting point. It took me a minute to figure out what you had measured. 2" between studs equals a 6 on...
Yup, searched, and I have run other disc brake systems. My current front end has a GM/jeep hybrid disc brake kit. The Suzuki Sidekick stuff is...
I crossed the part number and came up with some sources for those looking for a reamer. The reamer is a 1.5" per foot reamer. It is common...
Thank you for the info. I will cross the part number and see what I come up with....
I just picked up a 4.27 geared 72-75ish narrow track Dana 30 for the front of my old Willys. Does anyone know the measurements for the factory...
Anyone have pictures of a full weight flatty running the Black Diamond 3" springs?
Great thread! Any idea what size lift springs you have on your flatty. I'm looking to run some 34" LTBs on my flatty.....not that many choices...
Um....buy using that kinda of transmission you wouldn't be able to bypass the final drive. It would add some extremely low gears...like 4:1 or...
I was looking around for some more from spring options for my Willys MB. Has anyone looked into using a set of Suzuki Samurai rear springs on...
I'll work on finding some more pictures that are out in the wild. I'm usually to busy driving to take too many :) The body is original as far...
When I found it most of the changes where already made. All I did was rebuild and improve things as they wore out. It's a little too far gone to...
I have had this jeep for about 6 years now. Its been a great little jeep and one of my best finds. I have tinkered with it over the years and am...
I am running a 1980 Datsun pickup radiator in my MB with a 225 v-6. I have a dual electric fan off of a newer chrysler new yorker. The raditor...
I would have to put a vote in for looking at a pinto conversion...
Cool pic. I am going to have to keep an eye out for one of those at the pick and pull! It looks like it would fit my application. My steering...
I have a pass side maniold on the drivers side with the collector cut off welded up. Hole cut in the manifold just under the middle cylinder. Then...
I have a buick 225 with an early sm420 tranny mated to a D18 t-case with a homemade half inch thick adapter. Overall the buick makes PLENTY of...
Separate names with a comma.