Hi all has anyone ever used one of these. Looks like a great jeep heater. Can be mounted pretty much anywhere. Can you see any drawbacks?...
Hi all, have a basket case 1969 cj-5. I got it as a parts vehicle. While looking at it the steering box looks to be a saginaw of some kind. The...
Hi all. Here is what i'm thinking of. I have a full set of 69 cj-5 leaf springs I would like to put under the 3A. I would like to use Alcan Orbit...
Saw this on the back of a 4x4 the other day. IT was a jerry can that had been split at the horizontal seam a couple inches down from the top. It...
http://www.rigidized.com/
Hi all. I am useing mid 80's jeep hyd slave and master components to convert the clutch from linkage. My question is when setting my linkage...
Hi all, I didnt take it apart so I need to ask. Which direction does the curved side of the throw out bearing face. Its on a 1969 225 odd fire. I...
Thanks for all the header advice. I am to the point of final placement of the v6. I am useing the mounts from a cj5. The engine is set closer to...
Hi all, I am swapping in a 225 v6 into a 50 cj3a. It came from a 69 cj. I have saginaw steering and it looks like I will have to notch a motor...
Hi all. I am swapping in a 225/t-14/dana 18 into a cj3a, I talked to novak about a rebuild for the t-14 and was told the best thing to do is swap...
Hi all, I just picked up a basket case 1968/69 cj5. It has the 225 v6, 3 speed trans. There are some really interesting fuel tanks installed. One...
Hi all, I am wanting to swap in a v6 in place of an iron duke in my cj3a. I am wondering what Buick years are the best, and had anyone tried a...
Separate names with a comma.