Cj5 tub sounds like a good deal.....
So, I was in the local junk yard recently to pull some under-dash courtesy lights out of a YJ, and what I saw blew me away.... Someone had...
Yet another spin-off. I picked up a Yj mc/booster/prop valve. Right now I have 11" drums all the way around. What combination of MC and prop...
This is kind of a spin-off from a previous thread...... I have a Dana 44 front end and I'm not really sure what it came from. It has 11" drums....
Went to my local pick n pull today and found that someone had dropped off a mid 80's Laredo. I got the factory clock, tach, and intermittent...
I'm thinking of doing the power brake upgrade in my rig. Currently, I'm running 11" drums all the way around with 33's. A little more stopping...
Hi, Could someone help me out with the hose size going from PCV to carb. I think it's 3/8ID, but im not sure. Thanks
Hi, I picked up a Fuel tank vent vapor can from a CJ7 but have no idea how to plumb it. It was located in the rear driver's side fender and...
Right now I'm running a standard edelbrock "open sides" air cleaner with kn filter. It looks good, and I'm sure it performs well on street apps,...
Hi, I recently read that the pretty glass type fuel filters, like the one that the PO of my rig installed, are junk and potentially dangerous....
Currently my oil pressure hovers between 65-80. I've read varying opinions on where it should be, but I think it's too high given that the rear...
Hi, What size bolt goes thru the "Z" bracket and into the block. I'd measure it myself, but my rig is 3hrs from me right now. I realize every...
After an hour of driving and climbing a hill, my 74 cj5 w/304 starting lurching and died. It felt like a fuel/air problem. Is there a situation...
Hi, I'm in the process of converting to a 100 amp cs130 alt. I plan on putting a Maxifuse block between the alt and battery, but I'm not sure...
Ive been all over a few forums looking for an answer, but found different info. I found 24, 34, 34/78 to be the most common sizes to go with in a...
Hi, First of all, thanks for all of the advise on what alt to pick up. I bought a cs130 100Amp for $30 at the local junk yard, and found plenty...
I recently got around to replacing the frozen amp gauge in my '74. Would it be better to switch to a volt gauge?? I'm thinking of upgrading my...
The PO of my '74 installed a hand brake between the seats that seems to work. The mechanism and cable setup seems sturdy . I can pull the brake...
I'm finishing off a few small things like a fan shroud(WTB in classified), and noticed that my fan has no clutch and might not be original. What...
Is it possible to find aftermarket hardtop hinges?? I need the hinge that bolts to the windshield frame. Thanks
Separate names with a comma.