Problem with plan, Dana 300 and a centered rear will require a drive shaft that will be too short and too much angle. looks like maybe go back to...
Hey Mitsu. Yep, will look into that if it's just way too wide. Now looking for a set of YJ springs to put under it Sold both commando's and...
Wow, very impressive.
Find out actually what it is. A 72 will have better drivetrain, but will not have disks, they came around 76. A good running Commando, easily...
Got lucky with the gear ratio. 3.73's
Yep, should be able to cut em down and sleeve them or I can have my local shop do it.
My doner is an 86 CJ7 with the Dana 44 rear and 3.73's. Hoping it's not too wide and can live with them as it is what I have to work with. I...
Nice build. Looks like narrow tracks?
Hmmmm, only planning on running 31-32's. Not real interested in hacking the body though. Only want to run minimal lift as well. Maybe I could...
I've been trying to find a picture of a flatty with newer CJ7 axles. I just picked up a doner 86 CJ7 with the Dana 44 rear. 3.73 gears....
Ron, I just got hold of 3 sm420's of various conditions. I need to make a good one for the DJ but between the 3 we should be able to get 2 good...
DJ frame is a 56.
Any difference between the 2A frame and a DJ frame? My DJ frame is fine except I would need to weld in saggy steering and v6 mounts. I have a...
What time ya goin on sat? we got to take care of the farm then on our way, hopefully around 10-10:30
Separate names with a comma.